Pod Point Solo 3 installation
Choose a tethered home EV charger with a 7.5m Type 2 cable, or an untethered Solo 3 that lets you use your own charging cable.
The tethered Solo 3 suits drivers who want to park, lift the plug from its holder and connect straight to the car. The untethered Solo 3 has a Type 2 socket, so you can choose a cable that reaches your parking space and put it away when you’ve finished.
For most single-phase homes, the Solo 3 can charge at up to 7.4kW. A 22kW version is available for suitable three-phase installations. We’ll check your supply and your car’s AC charging capability during your free desktop survey.
Elecology will confirm the charger position, cable route and total installation price in a tailored, fixed-price quote before you book. Already have your Pod Point Solo 3? We can install it too.
Free desktop survey · Fixed-price quote · No upfront payment
Pod Point Solo 3 key features
Charging and smart features
- Charging speed
- Up to 7.4kW on single phase or up to 22kW with a three-phase Solo 3, a suitable supply and a compatible car.
- Cable
- Choose an attached 7.5m Type 2 cable or a Type 2 socket for a removable cable. Pod Point also lists a 4.8m Type 1 tethered version for compatible vehicles.
- Cheaper-rate charging
- Set a home charging schedule in the Pod Point app to match your tariff’s off-peak hours.
- Solar charging
- A dedicated surplus-solar mode is not listed for the original Solo 3. Tell us if automatically using excess solar is a priority.
- Connection
- Wi-Fi for connected charging features, reporting and software updates.
- Security
- The untethered socket locks the charger end of the cable during a charging session.
- Home load balancing
- Available on the 7.4kW Solo 3 with the correct monitoring connection. Auto Power Balancing is not standard on the 22kW model.
- Standout feature
- The 7.5m tethered Type 2 cable gives you extra reach around the car. Choose the socketed unit if you prefer to take your cable with you.
Design and specifications
- Dimensions
- Both versions are 330mm high × 290mm wide. The tethered unit is 112mm deep and the untethered unit is 167mm deep. Allow extra space for the plug and cable.
- Colour
- Black front with a grey outer housing.
- Installation location
- Suitable for a garage or an outside wall beside your parking space. The enclosure is IP54-rated.
- Charging history
- Use the connected app to review home charging activity and electricity use.
- Charger warranty
- Pod Point lists a three-year standard product warranty, subject to its terms. For a charger you already own, cover depends on its purchase and warranty history.
How much does Pod Point Solo 3 installation cost?
Your installed price depends on the Solo 3 version, the electricity supply and the route to your parking space. Our free desktop survey gives you a fixed quote for the work at your property before you book.
What affects the installation price?
- Charger version. Your choice of tethered or untethered unit, and single-phase or three-phase charging.
- Installation cable route. The distance from your electricity supply to the charger and how the cable can run.
- Mounting position. Whether there is a suitable wall near the car or an alternative mount is needed.
- Electrical equipment. The protective equipment, monitoring connection and any upgrades required.
- Equipment you already own. Tell us if you have the charger or a suitable removable cable so we can quote for what you need.
Your tailored, fixed-price quote
We’ll confirm the charger position, cable route, equipment and total price in writing. For the untethered version, your quote will also confirm whether a separate charging cable is included.
Your quoted price is fixed and won’t change after quotation.
No upfront payment
We don’t ask for payment upfront because we’re confident you’ll be happy with your installation. Once the work has been completed, we’ll email your invoice and payment details.
Free desktop survey · Fixed-price quote · No upfront payment
Everyday charging with a tethered or untethered Solo 3
The practical difference is what happens to the cable when you get home and when you leave. Think about where you park, where you keep your cable and whether anyone else uses the driveway.
Tethered: plug in when you park
The charging cable stays at home on the unit. Lift the plug from its holder, unwind enough cable to reach the car and connect it. When you leave, return the cable and plug to the charger.
Untethered: use a cable that suits your space
Plug your removable cable into the Solo 3 and then the car. After charging, disconnect it and store it in the garage or boot. This is useful if you take the same cable to public AC charge points or share the driveway with another vehicle.
Schedule charging for your overnight rate
If your tariff has a fixed cheap window, set your home charging schedule to match. If your energy supplier already controls charging through the car, follow its instructions so a second timer doesn’t block the session.
Check charging from your phone
Connect the Solo 3 to Wi-Fi to use its connected features and review charging activity. Check the signal at the proposed charger position, particularly if you park beside a detached garage.
Will the cable reach if you park the other way round?
Park as you normally would and measure from the proposed charger position to the charging port, following the route around the car. If two cars share the space, check both. Send us a photo if you’d like help choosing the best position.
Pod Point Solo 3 load balancing, solar panels and home batteries
Two questions matter here: do you want the charger to slow down when the house is using more electricity, or do you want it to follow surplus solar generation? These are separate functions.
Home load balancing on the 7.4kW Solo 3
With the monitoring clamp connected, Auto Power Balancing allows the charger to reduce its demand when the house needs more power. We’ll assess the route for both the supply cable and monitoring connection during your survey.
Planning a 22kW installation
The 22kW Solo 3 requires a suitable three-phase supply. Standard Auto Power Balancing is listed for the single-phase units. We’ll assess your available capacity before confirming a three-phase installation.
Charging at a home with solar panels
You can charge while your panels are generating. If the car needs more electricity than the panels are providing, the balance can come from the grid or a home battery. The original Solo 3 does not list a dedicated mode that automatically follows surplus generation.
Keeping stored energy for the house
If your battery is set to discharge while the car is plugged in, it may supply the charger. Tell us your battery and inverter models if you want to keep that energy for the evening. Your battery installer may need to advise on discharge settings.
Already own a Pod Point charger?
Send us a photo of its model label. The Solo 3 and Solo 3S have different specifications, so the label helps us confirm what your unit supports before we quote.
How your Pod Point Solo 3 installation works
-
Complete your free desktop survey
Send photos of your electricity supply, parking space and preferred charger position. Tell us which car you drive and whether you prefer an attached cable or a socket.
-
Receive your fixed-price quote
We’ll confirm the Solo 3 version, charging rate, cable route and equipment. If you already own the unit, we’ll check its model label and quote for installation.
-
Arrange your installation date
Once you accept the quote, we’ll arrange the next steps. If your local electricity network operator needs to approve the installation, we’ll book the work once approval comes through.
-
Have your charger installed
Your engineer fits the charger in the agreed position and installs the electrical protection, supply cable and monitoring equipment included in your quote.
-
Test the installation and set up charging
We test the installation and explain how to connect the car and set a charging schedule. Have your phone and Wi-Fi details available, plus your cable if you chose the untethered model.
-
Pay after completion
Once the work has been completed, we’ll email your invoice and payment details.
Free desktop survey · Fixed-price quote · No upfront payment
Why choose Elecology for your Pod Point installation?
Read what customers say about their quotes, the work at their homes and the support they received after installation.
A position that works for your car
We check where your charging port sits and how the cable will reach it, including around the front or rear of the vehicle.
A fixed price before you book
Your quote sets out the charger, equipment, cable route and installation work. You can ask questions before deciding whether to go ahead.
No upfront payment
We don’t ask for payment upfront because we’re confident you’ll be happy with your installation. Once the work has been completed, we’ll email your invoice and payment details.
Help choosing the right version
We’ll check the connector, cable length and charging output against your car and electricity supply, especially if you’re considering 22kW.
Three-year installation warranty
Elecology covers defects in our installation labour and materials for three years. The charger itself has separate manufacturer warranty terms.
Support after installation
Contact our team if you have a question about your installation. If the unit needs manufacturer diagnostics, we’ll explain how to get support.
Pod Point Solo 3 installation FAQs
Find answers about tethered and untethered charging, cable reach, overnight schedules and installing a Pod Point Solo 3 at home.
-
Choose tethered if your car usually parks in the same space and you want a cable ready to plug in. Choose untethered if you want to store the cable away, take it with you or choose a different cable length. Both versions charge one vehicle at a time.
-
The Type 2 tethered Solo 3 has a 7.5m attached cable. Pod Point also lists a single-phase Type 1 tethered model with a 4.8m cable. If you already own a unit, send us a photo of its connector and model label so we can confirm which one you have.
-
The charger has a Type 2 socket for a separate cable. Tell us if you already have one or would like one included. Your quote will confirm what we’re supplying.
-
A car with a Type 2 AC port can use the Type 2 tethered model or the untethered unit with a Type 2-to-Type 2 cable. For an older car with a Type 1 port, the untethered model can use a suitable Type 2-to-Type 1 cable. Tell us your vehicle model if you’re unsure.
-
The socket locks the charger end of the cable during a charging session. Once you’ve finished, follow your vehicle’s normal stop-and-unlock procedure before disconnecting.
-
Both units are 330mm high and 290mm wide. The tethered unit projects 112mm from the wall before allowing for the stored cable. The untethered unit projects 167mm before you insert the plug. For a narrow driveway or passage, send us a side-on photo as well as a front view.
-
You need the 22kW Solo 3, a suitable three-phase supply and a car that accepts 22kW AC charging. For the untethered model, your removable cable must also support that rate. If your car accepts a maximum of 11kW AC, it can draw up to 11kW from a suitable 22kW unit.
-
Yes. Connect the charger to Wi-Fi and use the app to set a schedule that matches your off-peak hours. If the car also has a timer, check that both settings allow charging during the same period.
-
Pod Point does not list a dedicated surplus-solar mode for the original Solo 3. Your car can still use electricity generated at home while charging, but a shortfall can be supplied by the grid or battery. If automatic solar charging is essential, tell us before selecting the charger.
-
Pod Point lists Auto Power Balancing on its 7.4kW Solo 3 models when the monitoring clamp is connected. The 22kW models do not include this feature as standard. We’ll assess the supply and confirm the arrangement in your quote.
-
Yes. Send photos of the unit, model label and any accessories supplied with it. We’ll confirm whether it is tethered or untethered, check the power rating and provide a fixed installation quote.
-
We’ll assess the fixed cable, protective equipment and monitoring connection. Send photos and any existing installation certificate with your survey, particularly if you want to move the charger or change from single-phase to three-phase charging.
-
Yes. Tell us which car you’re expecting and whether you usually drive or reverse into the space. We can plan the position around the charging port and complete the electrical testing without your car present.
Get your Pod Point Solo 3 installation quote
Send us photos of your parking space and electricity supply. We’ll help you choose between the tethered and untethered Solo 3, check the cable reach and provide a tailored, fixed-price quote.
Already have your Pod Point charger? We can install it too.
Free desktop survey · Fixed-price quote · No upfront payment
Prefer to speak to our team?