Kempower DC charger installation
DC charging designed around your fleet, depot and commercial site.
From electric vans to larger fleet vehicles, we design and install Kempower DC charging around your operating schedules, parking layout and available electricity supply.
Whether vehicles charge between shifts or remain parked overnight, we’ll assess the capacity and charging points your site needs, with room for future expansion considered from the start.
Our service includes electrical infrastructure, in-house groundworks, grid connection coordination, installation and commissioning, with ongoing support and annual charger maintenance.
Tell us about your project. We’ll arrange a call, carry out a survey and provide a fully costed installation proposal.
Design, build and operate EV charging solutions
Kempower DC charging key features
The Kempower Power Unit supplies DC power to separate Satellite charging points at your parking bays. We’ll specify the system around your vehicles, operating schedules and electricity supply, including how much power is available when several vehicles charge together.
Charging and power management
- DC charging for fleet operations
- We’ll assess the energy your vehicles need between arrival and departure, then recommend charging capacity to suit. Actual charging speed depends on the specified equipment, available power, vehicle capability and battery conditions.
- Separate Power Units and charging points
- The main power equipment sits separately from the Satellite units drivers use. This gives flexibility when positioning equipment and keeps the charging points at each bay compact.
- Dynamic power sharing
- Available charging power can be distributed between connected vehicles as their demand changes. Your proposal will distinguish the system’s total capacity from the maximum output available at each connection.
- Site load management
- Where the chargers share a supply with other equipment, compatible monitoring and controls can adjust charging demand to the available site capacity. We’ll identify the required hardware and software in your quote.
- Charging management and monitoring
- Kempower’s ChargEye platform supports remote charging management and monitoring. We’ll discuss the operational information your team needs and confirm the software services and ongoing costs included in your proposal.
- Scope for future expansion
- Modular Power Units allow additional capacity and charging points to be planned as demand grows. Expansion depends on the selected configuration, electrical infrastructure and available grid capacity.
Charging bays and driver access
- Cable handling
- Satellite charging points use a spring-assisted cable support system to help drivers handle the charging cable. We’ll check reach against vehicle size, charging-port position and parking orientation.
- Display and access controls
- A touchscreen provides charging information, while RFID supports driver authorisation. We’ll agree how staff, fleet drivers or other permitted users should access the system.
- Vehicle connections
- We’ll confirm the connector type and electrical compatibility for your vehicles. Your proposal will identify the number of charging connections and the equipment serving each parking bay.
- Payment options
- If you intend to charge customers or other drivers for electricity, we can include suitable metering, payment equipment and software in the design. Associated service and transaction costs will be explained separately.
- Site layout and protection
- We’ll plan equipment positions around vehicle movements, pedestrian access and maintenance space, including foundations, cable containment and impact protection where required.
How much does Kempower DC charger installation cost?
A Kempower installation is designed around your site. The price depends on the charging capacity, number of charging points and infrastructure required. We’ll discuss your operation, carry out a survey and provide a fully costed proposal for the agreed installation.
What affects the installation price?
- Charging equipment and capacity. The Power Unit configuration, installed power modules, Satellite charging points and connector arrangements needed to serve your vehicles.
- Grid connection and electrical infrastructure. Your available electricity supply and any upgrades to distribution equipment, feeder pillars or the grid connection. We’ll identify which works and costs are included in our proposal.
- Groundworks and cable routes. Excavation, ducting, foundations, containment and reinstatement between the supply, Power Units and charging bays. Our in-house groundworks team can deliver the agreed civil works.
- Parking layout and equipment protection. The positioning of charging points, cable reach, vehicle access and any barriers or bollards required to protect the equipment.
- Monitoring, connectivity and software. Site load management, communication connections, charging management services and any driver payment equipment included in the design.
- Installation programme and future expansion. Site access restrictions, phased works and any infrastructure installed now to support additional vehicles or charging points later.
Your fully costed installation proposal
Your proposal identifies the equipment, charging capacity, layout and installation work included. It sets out the electrical infrastructure, groundworks, commissioning and management services being supplied.
The price is fixed for the agreed scope of work. Any exclusions, provisional items or third-party connection charges will be clearly identified. Changes are discussed and agreed before proceeding.
We’ll also set out any ongoing software, connectivity, payment processing and maintenance costs separately, so you can assess the cost of operating the system alongside the installation investment.
Plan around the energy your fleet needs
Tell us how far vehicles travel, when they return and when they need to leave again. We’ll use those requirements to assess charging capacity, helping you choose equipment that supports your operation and planned growth.
Site assessment · Fully costed proposal · Ongoing support
Plan DC charging around your operation
The right charging setup depends on how much energy your vehicles need and the time available to deliver it. We’ll assess your operating schedules, site layout and electricity supply before specifying the installation.
Start with arrival and departure times
Vehicles parked overnight have a different charging window from those returning briefly between shifts. We’ll consider daily mileage, battery capacity and the time each vehicle spends on site to assess the charging output your operation needs.
Plan for vehicles charging together
The maximum output at one connection is different from the power available across the whole installation. We’ll assess periods when several vehicles need to charge and explain how the proposed capacity will be shared.
Make the charging bays practical to use
We’ll plan around vehicle lengths, turning space, charging-port positions and cable reach. Equipment locations also need to allow pedestrian access, maintenance space and protection from vehicle movements.
Allow for your next stage of growth
Tell us about vehicles you expect to add and any changes to your operating schedules. We can assess which foundations, ducts and electrical infrastructure to include now, with a clear explanation of the additional work future expansion would require.
Check grid capacity early
A larger DC installation may require changes to your electricity connection. We’ll assess the available supply and coordinate with the network operator where required. Any connection works, third-party costs and dependencies will be identified as the project develops so they can be included in the programme.
How your Kempower DC installation works
-
Discuss your charging requirements
Complete our enquiry form and we’ll arrange a call. We’ll discuss your vehicles, operating schedules, parking layout and future plans, gathering the information needed to assess your project.
-
Survey the site and prepare your proposal
We’ll assess the supply, equipment locations and cable routes. Your fully costed proposal will identify the Power Units, charging points, electrical infrastructure, groundworks and management services included.
-
Coordinate approvals and the programme
We’ll coordinate with the electricity network operator where required and agree the installation programme around approvals, equipment delivery and site access. Any planned power interruptions or phased works will be discussed in advance.
-
Build the charging infrastructure
Our in-house groundworks team completes the agreed foundations, excavation, ducting and reinstatement. Our electrical team installs the distribution equipment, power and networking cables, Power Units and charging points specified in your proposal.
-
Test, commission and hand over
We test the installation, commission the chargers and configure the agreed power management, driver access and software. We’ll explain operation to your team and provide the relevant handover documentation.
-
Support and maintain your chargers
We provide ongoing support and annual charger maintenance, with the scope and costs agreed in your service proposal. We can also review expansion requirements as your fleet and charging demand grow.
Design, build and operate EV charging solutions
Why choose Elecology for your Kempower installation?
We deliver commercial charging projects from design and groundworks through to commissioning and annual maintenance. Our team brings practical experience of installing Kempower equipment in an operational fleet depot.
Experience installing Kempower at a fleet depot
Our completed depot project included two Kempower Power Units and six DC charging points, alongside a new 630A Lucy Zodion feeder pillar. We installed the power and networking cables, commissioned the chargers and provide ongoing support and annual maintenance.
Explore our commercial charging projectsDesign based on your operation
We assess vehicle schedules, energy requirements and available power before specifying equipment. Your proposal explains the charging capacity provided and how the installation supports your current needs and planned growth.
Electrical installation and in-house groundworks
We coordinate the electrical work with our own groundworks team, including the agreed foundations, ducting, excavation and reinstatement. We’ll plan access and working areas around your site operations.
Grid connection coordination
Where network approval or connection works are required, we coordinate with the electricity network operator. We’ll identify responsibilities, third-party costs and programme dependencies as the project develops.
Three-year installation warranty
Elecology covers defects in our installation labour and materials for three years. Charging equipment has separate manufacturer cover, which we’ll confirm for the system supplied.
Ongoing support and annual maintenance
We support your installation after commissioning and provide annual charger maintenance. Your service proposal will set out the agreed scope, costs and arrangements for reporting issues.
Kempower DC charging FAQs
Find answers about planning a Kempower installation, charging multiple vehicles, electricity supply requirements and ongoing maintenance.
-
The Power Unit contains the equipment that converts electricity into DC power for vehicle charging. Satellites are the charging points positioned beside the parking bays, with the cables and controls drivers use. We specify these together as a complete system.
-
This depends on the installed Power Unit capacity, the charging point configuration and how many vehicles are charging together. The vehicle’s DC charging capability, battery temperature and state of charge also affect charging speed. Your proposal will distinguish total system capacity from the maximum output at each connection.
-
Yes. A Kempower system can serve multiple charging connections, sharing available power between vehicles. We’ll assess how many vehicles need to charge together and when they need to leave, then specify the equipment and capacity accordingly.
-
We can assess installations for different fleet vehicle types. We’ll check each vehicle’s connector, charging requirements and parking arrangement before specifying the system. For larger vehicles, cable reach, turning space and equipment protection are part of the design.
-
Not necessarily. We’ll assess your existing supply and the capacity available alongside other site loads. Some projects can use the existing connection; others require an upgrade or a new supply. We’ll coordinate with the electricity network operator where required and identify connection works separately in the proposal.
-
With suitable site monitoring and load management, charging demand can adjust as other electrical loads change. We’ll specify the required hardware and software. This helps manage available capacity, but it does not increase the power your connection can supply.
-
Kempower’s modular system allows expansion within the limits of the chosen equipment and electricity supply. Tell us about your growth plans so we can consider spare capacity, cable routes and future charging positions from the outset.
-
Yes, with the appropriate access controls, metering and management services. We’ll discuss whether charging is for authorised fleet drivers, staff or paying users and specify the setup accordingly. Any payment equipment, subscriptions and transaction charges will be identified in your proposal.
-
Yes. Our in-house groundworks team can complete the excavation, ducting, foundations and reinstatement included in your quote. We coordinate this with the electrical installation and the agreed site programme.
-
Timescales depend on the equipment, groundworks, site access and any electricity connection works. Following the survey, we’ll outline the programme and its dependencies. Network approvals, connection works and equipment delivery can affect the installation date.
-
Yes. We test the installation, commission the charging equipment and configure the agreed controls and software. At handover, we explain how to operate the system and report issues, and provide the relevant documentation.
-
Elecology provides a three-year installation warranty covering defects in our labour and materials. Kempower equipment has separate manufacturer cover. We’ll confirm the applicable terms for the system supplied.
Get your Kempower DC installation quote
Tell us about your site, vehicles and operating schedules. We’ll arrange a call, carry out a survey and provide a fully costed proposal for your DC charging installation.
Planning a new depot or expanding existing charging? We’ll help you assess the equipment, infrastructure and ongoing support your operation needs.
Design, build and operate EV charging solutions
Prefer to speak to our team?